Send Message

Vacuum Belt Filter Press For Wastewater Treatment Mining

Basic Information
Place of Origin: Shanghai, China
Brand Name: ZR
Model Number: ZR
Minimum Order Quantity: 1 Piece
Price: Price Negotiable
Packaging Details: Nude Cargo/Pallet/Wooden Case
Delivery Time: 20-30 days
Payment Terms: T/T
Supply Ability: 1000PCS/Year
Detail Information
Structure: Belt Type Filter Material: Polyester Wire
Pressure: Mechanical Pressure Type: Roller Press Filter
Belt Width: 3500mm Mud Processing Capacity: 50-60T/H
Filter Cake Production: 15-17T/H Sediment Percentage: 75-85%
Total Power: 33kw HS Code: 8421291090
High Light:

vacuum belt filter press


filter press for sludge dewatering


belt filter press mining

Product Description

ZR3500P8L Large Capacity Belt Filter Press


Technical Parameters

Model: ZR3500P8L

Belt width: 3500mm

Mud processingcapacity: 50-60t/h

Filter cakeproduction: 15-17t/h

Sediment percentage: 75-85%

Total power: 33kw



Model technical parameters

Model Belt width

Mud Processing

Filter cake


Total Power of

Total power
Zr-1000P8L 1000 10-16 2-3 75-85 3 10 5500*2000*2100 4500
Zr-1500P8L 1500 15-25 4-5 75-85 4 13 5800*2400*2200 6500
Zr-2000P8L 2000 25-35 6-7 75-85 5.5 17 7500*2900*2300 7600
Zr-2500P8L 2500 30-40 10 75-85 5.5 17 7800*3200*2500 9200
Zr-3000P8L 3000 40-50 12-15 75-85 11 33 12500*3500*2500 14500
Zr-3500P8L 3500 50-60 15-17 75-85 11 33 13000*14000*2500 15500


1.Bearing and pedestal
In order to prevent corrosion, all bearings and pedestals adopt a double V-ring seal, Apply nodular cast iron to produce the pedestals. The machine adopts double row centering roller bearing to realize large load-bearing capacity and long service life.

2. Filtrate collecting device
In order to prevent leakage and splashing of flushing water and filtrate, all flushing water and filtrate are collected through the drip tray, and they can be discharged intensively or separately.

3. Protective device
The safety protection net and warning sign are set on both sides of the machine. The fault emergency response system composed of the electric control limit wire switch; it can monitor all actions in the adjustment process of the filter belt. The limit switch triggers and shuts down when the adjustment system produces excessive deviation in the centering process.

4. Centralized electric control cabinet
The whole sludge dewatering system is controlled by a set of distribution control cabinets (manual contact control or PLC controller). The electronic control cabinet provides power supply, start-up, stop protection, and alarm (save from short circuit, overheating, overload, and phase deficiency control) for the main engine and its supporting equipment - sludge pump, cleaning pump, mixer, liquid pump, air compressor, and conveyor, etc.


Belt Press Filter Working Principle

The raw material, passing through the distributor, is pre-pressed and dehydrated in the wedge area, and then further squeezed and dehydrated in the large area low pressure drainage area composed of porous drainage rollers. Then, the raw material with a certain degree of dryness is pressed by three sets of high-intensity squeezing, i.e. roller I, roller II and roller III. Then the raw material with extremely low water content is pressed and dehydrated again by the mesh belt at the discharge port. Finally the dry filter cake is discharged. It basically meets the requirements of major varieties for moisture content, and the entire process is subject to extrusion and shear forces.

Vacuum Belt Filter Press For Wastewater Treatment Mining 0


Vacuum Belt Filter Press For Wastewater Treatment Mining 1



Vacuum Belt Filter Press For Wastewater Treatment Mining 2

Contact Details

Phone Number : +8613917783856

WhatsApp : +8613917783856